0
$

How to Make Wings for Fly Tying?

Tags: How to make wings for fly tying

Fly fishing is such a widespread activity that it is almost impossible to find natural flies for every angler. For this reason, artificial flies are made to compliment the natural flies. Every part (head, thorax, abdomen, legs, and wings) of the artificial fly must be designed to look exactly like a normal fly. Let's look at how to make wings for fly fishing. 


How to make wings using tape 

You'll need the following fly tying materials for this procedure: a piece of a plastic bag, iris foil, and straw of different colors.  
- Take a white paper and cut it into the right shape of the wing. Glue the cut piece onto another place, perhaps on black or dull cardboard. 
- Take a transparent tape. You'll use the tape to stick fibers correctly ate their place when you'll be creating wing veins.  
- Place the tape on top of the mold you created in the first step. Make sure that the sticky side of the tape faces upward.  
- As the tape is transparent, you can see both sides of the wing. So take the hackle fibers and place them on top of the glue side of the tape uniformly on both sides of the wing to look like typical wing veins. 
- The veining you've made using hackle fibers is now ready. You should be able to see equal results on both wings  
- You can use a marker to make spots and vein knots carefully on the veins 
- Now set the swiss straw on your tape (that you've already veined). Press it tightly against the tape and veins. Be sure not to make movements that will destroy the vein pattern you made.  
- To secure your wing so far, take another piece of the transparent tape and place it on top of the swiss straw. Press it hard to tighten it. 
- Take a marker and draw the lines of the edges of the wings keenly following the shape of the white paper mold underneath.  
- Take the tapes off the white mold now. Use a small pair of scissors to cut the wings along the lines you've made using a marker.  
- You have a perfect wing ready to be attached to your fly.  

How to make wings using tape- alternative II  

This method is a bit simpler but you cannot be very creative with it, unlike the first technique. For this procedure, you'll need an actual bird feather, glue, and transparent tape, and a source of heat.  
- Take the tape and place it upside down so that the sticky side faces upwards.  
- Place your feather on the tape and press it so that it sticks wholesomely on the tape. 
- Pour a little glue on the feather and spread it uniformly on the feather 
- Heat the upper side to allow the glue to dry. Don't use too much heat as it can burn the feather. Also, don't use direct flame.  
- The wing is already firmly stuck on the tape. Using scissors or a blade cut the wing into the shape you desire.
- If you want flat wings, you can use them as they are or if you want them facing upward, you can fold them from the center to form kind of a V shape.

Related Make Wings for Fly Tying Article:

The question of how to make dubbing for fly tying is very simple. Fly tying dubbing is either made from natural or synthetic material. Although synthetic fibers have gained acceptance in the market, most people prefer fly tying dubbing that is made from...[get more about How to Make Dubbing for Fly Tying?]

Where to buy fly tying materials should not stress you. You can easily buy the materials online at Maxcatch fly fishing. The company has a good reputation in selling quality products. You can visit the store online and sample the different materials they...[get more about Where to Buy Fly Tying Materials]

Do you know how to do a whip finish in fly tying? What about the meaning of the term itself? As an angler, performing certain fly fishing techniques requires the knowledge of an expert or proper directions in order to arrive at a convincing set up that...[get more about How to do a whip finish in fly tying]

Recommended Make Wings for Fly Tying Production:

Tungsten alloy beads are environmentally friendly, stable performance, corrosion resistance, rust prevention, and good color. Can meet the speed of fast sinking and all your flight binding needs...[get more about 25Pcs/lot Nice-Designed Slotted Fly Tying Beads Tungsten]

A beginner's vise that will satisfy experienced tiers as well. The Apprentice Vise has a rotary tension screw, a hinged stem, and will hold hooks size 28 to 1/0...[get more about TVC New model Green color fly tying vise]


Related Faqs

Prev: How to Make Dubbing for Fly Tying?

Next: Are You Looking for A Fly Fishing Glue? - Here Are Your Options


100% Satisfaction Guarantee.

We back every product we sell against defects in materials and workmanship. If you aren't satisfied, neither are we—just return the item for repair, replacement, or refund, depending on the item.

Best products with personal service and care, this is Maxcatch